Configure your CCTV system to calculate storage
Camera Setup
4
15 fps
Recording Settings
24 hrs
30 days
50%
5-20% Quiet | 30-60% Normal | 70-100% Busy
10%
Advanced Options
Quick Presets
Calculation Results
Daily Storage
-
GB/day
Total Required
-
GB
With Buffer
-
GB
Per Camera/Day
-
GB
Bitrate/Camera
-
Mbps
Per HDD Bay
-
TB
Recommended Hard Drives
NOTE: These are estimates. Actual storage varies with scene complexity. For professional CCTV planning contact Febino Digital: +91 98-7438-7438
Select a category and enter a value
Categories
📏Length
⚖️Weight
🌡️Temperature
⬛Area
🧊Volume
🚀Speed
⏱️Time
💾Data Storage
🔵Pressure
⚡Energy
🔋Power
⛽Fuel
📏 Length
=
Enter a value to see the formula.
Quick Reference
| From | To | Factor |
|---|
📡 Offline Modbus Data Scanner — Configure, Scan & Write
TCP Connection
Not Connected — Simulation Mode
Enter IP & Port then click Detect to probe device
Setup Required — Follow Febino Digital Instruction
Bridge port:
▸ MODBUS ADDRESS REFERENCE (1-based → use 0-based in scanner)
00001 – 09999
Coils (FC01) — R/W Bit
10001 – 19999
Discrete Inputs (FC02) — Read Only
30001 – 39999
Input Registers (FC04) — Read Only
40001 – 49999
Holding Registers (FC03) — R/W Word
⚠ Register 40001 = address 0 in scanner (0-based). Use the Desktop App to connect to real hardware.
🏗 BACnet/IP Data Scanner — Live Object Monitor
▸ BACNET OBJECT TYPES REFERENCE
ID 0 · Read Only
Analog Input
ID 1 · R/W
Analog Output
ID 2 · R/W
Analog Value
ID 3 · Read Only
Binary Input
ID 4 · R/W
Binary Output
ID 5 · R/W
Binary Value
ID 13 · Read Only
Multi-State Input
ID 14 · R/W
Multi-State Output
Port 47808 (0xBAC0) · UDP · Requires network access to BACnet device.
LAN Device Scanner — Scan IP Devices on Local Network
Checking bridge connection...
Ready to scan. Enter IP range and click Scan LAN.
SCANNED
0
FOUND
0
OFFLINE
0
| #ID | IP Address | MAC Address | Status | Response | Type | Timestamp |
|---|---|---|---|---|---|---|
| No scan data — click Scan LAN to discover devices | ||||||
Port Checker — Check Open Ports on a Host
Opens a real TCP connection to each port via the Bridge — an actual reachability test, not a guess. Requires the Bridge above to be connected (browsers can't open arbitrary TCP ports on their own).
Enter a host and ports, then click Check Ports. Requires the Bridge above to be connected.
Your Public IP
Detecting...
—
City
—
Region
—
Country
—
Timezone
—
Coordinates
—
Subnet Calculator
IP Address Lookup
Enter any public IP address to get details
IP Type Checker
Recent Lookups
No lookups yet