◉ Fire Detection & Safety

FIRE ALARM SYSTEM
IN KOLKATA

Industrial-grade conventional and addressable fire detection systems, VESDA aspirating smoke detection, fire suppression and emergency lighting — designed, supplied, installed and maintained by certified engineers across Kolkata, West Bengal and pan-India.

How A Fire Alarm System Works

A modern fire alarm system uses an addressable Fire Alarm Control Panel (FACP) as the brain — continuously polling input devices (smoke detectors, heat detectors, manual call points, VESDA aspirating systems) and triggering output devices (sounders, strobes, sprinkler valves, PA systems, BMS gateways) the moment a fire signature is confirmed. Below is the typical topology Febino Digital deploys for industrial and commercial buildings across Kolkata and India.

Fire alarm system topology — input detectors connected to a central control panel that triggers output devices ▸ DETECTION SMOKE DETECTOR Photoelectric · Ionisation HEAT DETECTOR Fixed · Rate-of-Rise MANUAL CALL POINT Break Glass · Push VESDA Aspirating Smoke Detection ▸ CONTROL SYSTEM ACTIVE · LOOP OK FIRE ALARM CONTROL PANEL Addressable Loop · EN54 / UL · Notifier · EST · Honeywell ▸ RESPONSE SOUNDER / STROBE Audio + Visual Alarm SPRINKLER INTERFACE Wet · Dry · Pre-action PA / VOICE EVAC EN54-16 Certified BMS / IBMS GATEWAY BACnet · Modbus Bridge FIG.01 · FIRE ALARM SYSTEM TOPOLOGY · NBC 2016 / EN 54 / UL 864 COMPLIANT
Detection Loop: Input devices report status to FACP
Healthy Status: System normal — no fire condition
Trouble: Maintenance signal — open loop / battery

What We Install

Febino Digital delivers end-to-end fire alarm system installation in Kolkata for industrial plants, commercial complexes, hospitals, hotels, educational institutions and high-rise residential projects. Every system is designed to comply with the National Building Code (NBC 2016) and West Bengal Fire Services regulations.

01

Addressable Fire Alarm

Loop-based addressable systems with point-level identification. Suitable for high-rises, hospitals, factories. Brands: Notifier, EST, Morley, Honeywell.

02

Conventional Fire Alarm

Zone-based detection for small to mid-size commercial buildings, schools and warehouses. Cost-effective, reliable, easy to maintain.

03

VESDA Aspirating Detection

Very Early Smoke Detection for data centres, server rooms, cold storage, clean rooms and high-ceiling warehouses.

04

Fire Suppression

Clean agent (FM200, Novec 1230), CO2 and water mist suppression for server rooms, switchgear and process areas.

05

Public Address (PA) System

EN54-16 certified voice evacuation and PA systems integrated with fire alarm panels for emergency announcements.

06

Emergency Lighting

Self-contained and centrally-monitored emergency luminaires and exit signage for IS 9583 compliance.

Our Installation Process

NOTIFIERESTMORLEYHONEYWELLSIEMENSEDWARDSRAVEL

Industries We Serve

Manufacturing & Process

Steel plants, chemical, pharma, textile, food processing.

IT & Data Centres

Server rooms, IDF/MDF, control rooms with VESDA + clean agent.

Healthcare

Hospitals, nursing homes, diagnostic labs — IS 2189 compliant.

Hospitality

Hotels, resorts, banquet halls, restaurants — voice evacuation.

Commercial & Retail

Office towers, IT parks, shopping malls, showrooms.

Education

Schools, colleges, hostels, university campuses.

Warehousing & Logistics

Cold storage, distribution centres, godowns.

Residential High-Rise

Apartments above 15m height — NBC mandatory zones.

Frequently Asked Questions

What is the difference between conventional and addressable fire alarm systems?

A conventional fire alarm system divides the building into zones and alerts which zone has triggered, suitable for small to medium buildings. An addressable fire alarm system identifies the exact device that triggered (every smoke detector, heat sensor, manual call point has a unique address), making it ideal for large industrial and commercial properties where rapid identification of fire location is critical. Febino Digital installs both types using Notifier, EST, Morley, Honeywell and Siemens panels.

What does fire alarm system installation cost in Kolkata?

Fire alarm system cost in Kolkata depends on building size, number of detection zones, panel type (conventional vs addressable), brand and integration with sprinkler or PA systems. Basic conventional systems for small commercial spaces start around ₹40,000 while addressable systems for industrial facilities run from ₹2 lakh upward. Contact Febino Digital at 9874387438 for a site survey and BOQ-based quote.

Is fire alarm system mandatory for buildings in West Bengal?

Yes. As per the West Bengal Fire Services Act and the National Building Code of India (NBC 2016 Part 4), fire detection and alarm systems are mandatory for high-rise buildings, commercial establishments, hotels, hospitals, educational institutions and industrial premises. Febino Digital provides NBC-compliant fire alarm system design with Fire Brigade NOC documentation support.

What is VESDA and where should it be installed?

VESDA (Very Early Smoke Detection Apparatus) is an aspirating smoke detection system that continuously samples air through a network of pipes, providing the earliest possible warning of fire — often before visible smoke. VESDA is recommended for server rooms, data centres, clean rooms, high-ceiling warehouses, cold storage and heritage buildings where conventional point detectors are slow or impractical.

Do you provide AMC for fire alarm systems in Kolkata?

Yes. Febino Digital offers comprehensive Annual Maintenance Contracts (AMC) for fire alarm systems in Kolkata and across India, including quarterly preventive testing of detectors, panel diagnostics, battery health checks, and Fire Brigade-mandated half-yearly compliance reporting.

Need a Fire Alarm System Quote?

Speak to a certified fire safety engineer today. Free site survey for projects in Kolkata, Howrah, Durgapur, Asansol and across West Bengal.

📞 Call +91 98 7438 7438